Android devices, thanks to their open-source nature allows you to carry out a plethora of tweaks and customizations. Then if you step into the custom development scenario, the possibilities expand even further. Once you have unlocked the device’s bootloader, you are now in a position to flash custom ROMs, install a custom recovery like TWRP or install modules. Along the same lines, you could also root your device via Magisk (with or without the use of TWRP).

How to Fix TWRP 0MB Internal Memory IssueHow to Update TWRP Recovery on any Android DeviceTWRP: fastboot flash vs fastboot boot: Which command to useHow to Replace LineageOS Recovery with TWRP

However, all these tweaks come with some associated risks as well. If you end up flashing an old or incorrect custom binary, then your device might go to a boot-loop or get soft-bricked. Well, even that happens, then is quite a handy workaround. Since it is soft-bricked, you could still access the Fastboot or Bootloader Mode on your device. As a result, you could then flash Stock Firmware via Fastboot Commands and bring your device back to working condition. But sometimes things get a little bit more complicated. Rather than a soft-brick, your device might end up being hard-bricked. As and when that happens, your deivce is as good as a ‘brick’. At the most, if your device has a LED, it will continuously blink red, but that is it. You wouldn’t be able to access Fastboot, Bootloader, or Recovery Mode on your device. While all these might sound scary, but there is still a way to get back your device. All that is needed is to boot your Android device to EDL Mode and then flash the stock firmware using the designated tools (more on that later). And in this guide, we will help you with just that. Follow along.

How to fix ADB Device not found [List of Devices Attached is blank]Detailed Steps to Fix adb is not recognized ErrorHow to Fix Unauthorized Device with ADB Commands [3 methods]How to Fix Android Device stuck in Fastboot Mode

What is EDL Mode | Why is it Needed?

EDL or Emergency DownLoad is a special mode that makes it possible to force flash the stock firmware on your device. This EDL mode is only present on devices that have an underlying Qualcomm chipset. As far as its usefulness is concerned, this comes in handy when your device is hard bricked. When that happens, you wouldn’t be able to access any partition on your device or flash any file for that matter. In earlier times, the only way out was to take your device to the service center. However, with the passage of time, some of these tools got leaked and it proved to be a blessing in disguise for us, the tech enthusiasts. So if your deivce is hard bricked, then you could make use of the tools such MSM Download Tool for OnePlus devices, QPST, and QFIL Tools for other Android devices. With Xiaomi, things are a little bit difficult, but we will show you the workarounds for that as well. So with that said, let’s now turn our attention to the different methods that will help you to boot your Android device to the EDL Mode.

How to Boot any Android Device to EDL Mode

There are a total of three methods that will help you to carry out this process. The first one is done via the ADB Commands, the second one via the Fastboot Method while the third one is done using hardware key combinations. Each of these methods has a few caveats as well as added advantages, which we will be mentioning as well. So without further ado, let’s get on with the guide to boot your Android device to the EDL Mode. Just make sure to check-mark all the requirements that we have mentioned in the below prerequisites section.

Fix Sahara communication failed error in MSM Download ToolHow to Fix Stuck in Param Preload error MSM Download ToolFlash OFP File in Realme Devices using Realme Flash ToolUnlock Bootloader on Realme 2 without Unlock Tool or In-Depth Test Tool

Prerequisites

First and foremost, download and install the Qualcomm USB Drivers on your PC: QDLoader_HS_USB_Driver_64bit_Setup.exe. Just launch the setup file and proceed with the on-screen instructions to install it. Next up, download and install the Android SDK Platform Tools on your PC. This will provide you with the necessary ADB and Fastboot binaries.Now here is an interesting point to keep a note of. If your device is hard bricked, then chances are it might be already in EDL Mode. If you are seeing just the black screen with no response and cannot force reboot or boot to any mode, then chances are it might be in EDL.Likewise, if your device has a Notification LED, then it might be blinking red as well. So if your device is already in EDL mode, then you may directly proceed with the steps to unbrick it. However, we would still recommend you go through the below information to add another page to your knowledge book.

Method 1: Boot Bricked/Unbricked Android to EDL Mode via ADB Command

This method will only be applied to devices that are in perfect working condition. However since it falls under the topic’s domain, we decided to include it here. So follow the below steps to boot your Android device to EDL Mode via ADB Commands:

Method 2: Boot Bricked/Unbricked Android to EDL Mode via Fastboot Command

If your device is in a bootloop or has been soft-bricked, then you wouldn’t be able to use the first method. However, even then, chances are you will still be able to access the Fastboot Mode. In that case, you could either flash stock firmware via the fastboot commands. Or if that doesn’t work out, then you could boot your device to EDL from Fastboot Mode and then use the required tool to unbrick.

Method 3: Boot Bricked/Unbricked Android to EDL Mode via Hardware Keys

If your device is hard bricked, then you wouldn’t be able to access the Fastboot Mode, let alone ADB. As a result, both the above methods wouldn’t give out satisfactory results. In this case, this should be your go-to method. The only thing to keep in mind that different OEMs follow different hardware key combinations to boot their device to EDL Mode. Even then, we have listed out all the possible permutations and combinations that will help you to boot your Android device to EDL Mode. Follow along.

Root Android 11 via Magisk Patched boot.img (without TWRP)How to Pass Magisk SafetyNet on Rooted Android 11Fix Magisk patched boot.img issue while Rooting Android 11How to Run ADB Fastboot Commands directly on Android without Root

Boot Bricked OnePlus Devices to EDL Mode

Power off your device. if you cannot do so as of now, then keep it aside and let the battery drain out. However, if your OnePlus device is in a Qualcomm CrashDump Mode, then press and hold the Volume Up and Power button together for around 10 seconds. This will exit the CrashDump Mode and power off your device.

Boot Bricked Realme Devices to EDL Mode

First and foremost, make sure your device is turned off. For most of our readers, that will anyways be the case since the device has been hard bricked. However, if that’s not the case, then we would recommend you to keep your device aside until the battery drains out and your device completely turns off. Once that is done, refer to the instructions given in this guide: How to Boot Realme Devices to EDL Mode (3 Methods) and Unbrick It.

Boot Bricked Xiaomi Devices to EDL Mode

You might also get the “FAILED (status read failed (Too many links))” error message while booting to EDL. Simply ignore this message as it wouldn’t conflict with the EDL Mode. For further references, the below guides shall help you out:

Fix Mi Account Authorization | Unbrick Xiaomi | EDL ModeHow to Bypass Xiaomi Account Verification via Mi Unlock ToolDownload Patched Firehose file for 600+ Android DevicesUnbrick Redmi Note 7 | Note 8 | Note 9 Series: The Fix?

Boot Other Hard Bricked Android devices to EDL Mode

That’s it. With this, we conclude the guide on how to boot Android devices to EDL Mode. We have shared three different methods for the same, with a special focus on hard bricked OnePlus, Xiaomi, and Realme devices. If you still have any queries, do let us know in the comments section below. We will get back to you with a solution at the earliest.

Use ADB and Fastboot Commands on Rooted Android Without PCHow to Root Android Devices Without TWRP RecoveryHow to Root Android Devices via TWRP RecoveryFix Magisk Module Bootloop without TWRP Recovery

About Chief Editor

How to Boot any  Bricked Unbricked  Android to EDL Mode   DroidWin - 8How to Boot any  Bricked Unbricked  Android to EDL Mode   DroidWin - 37How to Boot any  Bricked Unbricked  Android to EDL Mode   DroidWin - 27How to Boot any  Bricked Unbricked  Android to EDL Mode   DroidWin - 32How to Boot any  Bricked Unbricked  Android to EDL Mode   DroidWin - 81How to Boot any  Bricked Unbricked  Android to EDL Mode   DroidWin - 33How to Boot any  Bricked Unbricked  Android to EDL Mode   DroidWin - 62How to Boot any  Bricked Unbricked  Android to EDL Mode   DroidWin - 60How to Boot any  Bricked Unbricked  Android to EDL Mode   DroidWin - 94